ubuntu 加入 ISCSI 磁盘分区

By | 2018-11-27

[1] Configure iSCSI Initiator

[email protected]:~#aptitude -y install open-iscsi
[email protected]:~#vi /etc/iscsi/iscsid.conf
# line 39: uncomment

node.session.auth.authmethod = CHAP

# line 43,44: uncomment and set username and password which set on iSCSI Target

node.session.auth.username =username
node.session.auth.password =password

# discover target

[email protected]:~#iscsiadm -m discovery -t sendtargets -p 10.0.0.30
10.0.0.30:3260,1 iqn.2012-07.world.server:target0

# confirm status after discovery

[email protected]:~#iscsiadm -m node -o show

# BEGIN RECORD 2.0-871 node.name = iqn.2012-07.world.server:target0
node.tpgt = 1
node.startup = manual
iface.hwaddress = <empty>
iface.ipaddress = <empty>
iface.iscsi_ifacename = default
iface.net_ifacename = <empty>
iface.transport_name = tcp
iface.initiatorname = <empty>
node.discovery_address = 10.0.0.30
node.discovery_port = 3260
node.discovery_type = send_targets
node.session.initial_cmdsn = 0
node.session.initial_login_retry_max = 8
node.session.xmit_thread_priority = -20
node.session.cmds_max = 128
node.session.queue_depth = 32
node.session.auth.authmethod = CHAP
node.session.auth.username = username
node.session.auth.password = ********
node.session.auth.username_in = <empty>
node.session.auth.password_in = <empty>
node.session.timeo.replacement_timeout = 120
node.session.err_timeo.abort_timeout = 15
node.session.err_timeo.lu_reset_timeout = 20
node.session.err_timeo.host_reset_timeout = 60
node.session.iscsi.FastAbort = Yes
node.session.iscsi.InitialR2T = No
node.session.iscsi.ImmediateData = Yes
node.session.iscsi.FirstBurstLength = 262144
node.session.iscsi.MaxBurstLength = 16776192
node.session.iscsi.DefaultTime2Retain = 0
node.session.iscsi.DefaultTime2Wait = 2
node.session.iscsi.MaxConnections = 1
node.session.iscsi.MaxOutstandingR2T = 1
node.session.iscsi.ERL = 0
node.conn[0].address = 10.0.0.30
node.conn[0].port = 3260
node.conn[0].startup = manual
node.conn[0].tcp.window_size = 524288
node.conn[0].tcp.type_of_service = 0
node.conn[0].timeo.logout_timeout = 15
node.conn[0].timeo.login_timeout = 15
node.conn[0].timeo.auth_timeout = 45
node.conn[0].timeo.noop_out_interval = 5
node.conn[0].timeo.noop_out_timeout = 5
node.conn[0].iscsi.MaxRecvDataSegmentLength = 262144
node.conn[0].iscsi.HeaderDigest = None
node.conn[0].iscsi.DataDigest = None
node.conn[0].iscsi.IFMarker = No
node.conn[0].iscsi.OFMarker = No
# END RECORD
# login to target

[email protected]:~#iscsiadm -m node –login

Logging in to [iface: default, target: iqn.2012-07.world.server:target0, portal: 10.0.0.30,3260]
Login to [iface: default, target: iqn.2012-07.world.server:target0, portal: 10.0.0.30,3260]: successful
# confirm session

[email protected]:~#iscsiadm -m session -o show

tcp: [1] 10.0.0.30:3260,1 iqn.2012-07.world.server:target0
# confirm partitions

[email protected]:~#cat /proc/partitions

major   minor   #blocks         name

8          0         31457280     sda
8          1         512000         sda1
8          2         30944256     sda2
253      0         20971520     dm-0
253      1         6160384       dm-1
253      2         3809280       dm-2
8          16       104857600   sdb

# added new device provided from target

[2] Configure iSCSI Target
[email protected]:~#pvcreate /dev/sdb1

Physical volume “/dev/sdb1” successfully created
# create a volume group named “vg_target00”

[email protected]:~#vgcreate -s 32M vg_target00 /dev/sdb1

  Volume group “vg_target00” successfully created
# create a logical volume named “lv_target00”

[email protected]:~#lvcreate -L 100G -n lv_target00 vg_target00

  Logical volume “lv_target00” created
[email protected]:~#aptitude -y install iscsitarget iscsitarget-dkms
[email protected]:~#vi /etc/default/iscsitarget
# change

ISCSITARGET_ENABLE=true

[email protected]:~#vi /etc/iet/ietd.conf
# add at the last
# naming rule : [ iqn.yaer-month.domain:any name ]

Target iqn.2012-07.world.server:target0

# provided devicce as a iSCSI target

Lun 0 Path=/dev/vg_target00/lv_target00,Type=blockio

# iSCSI Initiator’s IP address you allow to connect

initiator-address 10.0.0.31

# authentication info ( set anyone you like for “username”, “password” )

incominguser username password

[email protected]:~#service iscsitarget restart
* Removing iSCSI enterprise target devices:
…done.
* Stopping iSCSI enterprise target service:
…done.
* Removing iSCSI enterprise target modules:
…done.
* Starting iSCSI enterprise target service
…done.
…done.
[email protected]:~#chkconfig tgtd on
[email protected]:~#ietadm –op show –tid=1

# confirm status

 

Wthreads=8
Type=0
QueuedCommands=32
NOPInterval=0
NOPTimeout=0

發佈留言